Production

Main » Production » Secondary polymeric granule

Secondary polymeric granule

Producible secondary granule is living its second life finding wide application in production of industrial-use goods (sewer pipes, technical films, boxes and etc.)

The assortment of secondary polymeric output granule

Product name: LD–200, LD–201, LD–202

Feed stock (starting materials) characteristics: high-pressure polyethylene waste the use of colored and uncoloured film materials (thermosetting film or shrinkable film)

Processing characteristics: grinding, washing, agglomeration, and granulation.

Recommended processing methods: high-pressure polyethylene is applicable for processing by extrusion

No.	Parameter naming	Measurement unit	Measuring result
1	Colour	uncolored, blue-green
2	Granule’s form	“tablet”
3	Size of granules	mm	3-6
4	Apparent density, no less	g/cm3	0,4
5	Melt flow index	g/10min	0,15-0,45
6	Tensile strength, no less	MPa	14,0
7	Elongation at break, no less	%	400
8	Tensile yield limit, no less	MPa	9,8
9	Mass fraction of volatile matter, no more	%	0,3
10	Smell and smack of aqueous extract, no more	point	1

Product name: LD–204, LD–205

Feed stock (starting materials) characteristicswaste of stretch film

Processing characteristics: grinding, washing, agglomeration, and granulation.

Recommended processing methods: high-pressure polyethylene is applicable for processing by extrusion and molding

No.	Parameter naming	Measurement unit	Measuring result
1	Acceptable colour	uncolored
2	Granule’s form	“tablet”
3	Size of granules	mm	3-5
4	Apparent density, no less	g/cm3	0,4-0,5
5	Loading melt flow index	g/10min	2,5-2,9

Product name: LD–206, LD–207, LD–208

Feed stock (starting materials) characteristics: high-pressure polyethylene waste from the use of film materials (coloured and uncoloured)

Processing characteristics: grinding, washing, agglomeration, and granulation.

Recommended processing methods: high-pressure polyethylene is applicable for processing by extrusion and molding

No.	Parameter naming	Measurement unit	Measuring result
1	Colour	white, grey
2	Granule’s form	“tablet”
3	Size of granules	mm	3-6
4	Apparent density, no less	g/cm3	0,4
5	Melt flow index	g/10min	0,2-0,8
6	Tensile strength, no less	MPa	14,0
7	Elongation at break, no less	%	400
8	Tensile yield limit, no less	MPa	9,8

Product name: HD-100

Feed stock (starting materials) characteristics: high-pressure polyethylene waste from the use of uncoloured film materials

Processing characteristics: grinding, washing, agglomeration, and granulation.

Recommended processing methods: high-pressure polyethylene is applicable for processing by extrusion and molding

No.	Parameter naming	Measurement unit	Measuring result
1	Colour	black
2	Granule’s form	“tablet”
3	Size of granules	mm	3-6
4	Apparent density, no less	g/cm3	0,4
5	Melt flow index	g/10min	0,05-0,4
6	Tensile strength, no less	MPa	14,0
7	Elongation at break, no less	%	350
8	Tensile yield limit, no less	MPa	12,0

Донецк,Украина,пленка,производство,позиционирование,торговая марка,торговый знак,менеджер,разработка,позиционирование,Украина,пленка,производство,позиционирование,торговая марка

DONETSK

Ukraine, 83009,
Novorossiskaya str., 9
tel: +38 (062) 312-26-57
fax: +38 (062) 305-68-68
E-mail: office@dpa.com.ua

MOSCOW

Russia, 129327,
Lenskaya str., 2/21,
pl. 3, r.3
tel: +7(495)775-89-63
E-mail: alex@dpamoscow.ru

KIEV

Ukraine, 04655,
Moskovskiy avenue, 21, of. 12
tel: +38(044)461-90-77
E-mail: adm@dpa.kiev.ua

Our representatives

Dnepropetrovsk
Kharkov
Odessa
Rostov-on-Don

Пленки полипропиленовые
ламинированные материалы
молочные пленки
Пленки с "твист"
Банан
Петля
Майка

Дизайн сайта RULER advertising

Разработка и продвижение сайтов в Донецке «Веб-Забота» - 2010